Ready for ResMed latest flagship auto CPAP machine with a remote connection feature? Try ResMed AirSense 11 Automatic CPAP machine.
ResMed AirSense 10 Auto CPAP Machine (No Cellular Connection)
The same smart, quiet, and well-loved AirSense 10 machine without the built-in cellular communication modem but with an SD card included.
If you are looking for a top-of-the-line CPAP, look no further than the ResMed AirSense 10 Auto sleep apnea machine with a Heated Humidifier. This smart, little machine can read your breathing, record your sleep data for your doctor, and make every day a dream with its many features.
Set the Ramp to ease yourself into a good night’s sleep while the Auto setting applies its algorithm to adjust to your breathing just like magic.
Data sharing is also a walk in the park! Simply have the data read using the included SD card to seamlessly record your sleep data and compliance reports. Then, you can share that data with your healthcare professionals.
- The auto apnea device Card-to-Cloud device stores your sleep and therapy data on the included SD card. The data can then be uploaded to the cloud to share with your healthcare provider.
- Advanced Event Detection
- Identifies Central Sleep Apnea (CSA), Respiratory Effort Related Arousal (RERA), and Cheyne-Stokes Respiration (CRS) events to provide your sleep specialist with continuing valuable insight into your health.
- Color LED Screen
- Read the screen easily.
- Ambient Light Sensor
- Automatically adjusts the screen brightness to the room and shuts it off when inactive.
- FAA Approved and Travel-Friendly
- Intuitive to the user
- Color LCD screen make it easy to navigate menus and customize comfort settings.
- Lets you provide access to your data effortlessly with this feature. (with SD card reading).
- EPR (Expiratory Pressure Relief)
- Reduces the pressure when you exhale.
- Breathe in, and the machine will start automatically.
- Humidifier included
- Heated tubing optional
- Auto Ramp
- Slowly eases the user into higher pressures by starting out on a low setting.
- Mask Fitting
- adjust the mask fit so as to reduce or eliminate mask leaks – prior to using a new mask or before a night’s sleep.
- ClimateLineAir Tubing (Optional)
- Heated tubing helps reduce therapy side effects, such as rainout or dry mouth.
- The warm air keeps the inflow of moisture.
- Ramp: Auto
- Start Pressure: 4 cm H2O
- Humidity Level: 4
- Mask Type: Pillows
- EPR: Off
- SmartStart: Off
- Tube Type: Slimline
What is Card-to-Cloud (C2C)?
C2C, or Card-to-Cloud, enables healthcare providers to access patient therapy and usage data via the device’s SD card. Current Air10™ C2C devices capture but cannot relay data directly to the cloud. Your sleep specialist can use AirView™ to log your data by manually downloading it off your SD card which is located on the side of your AirSense 10.
Do C2C devices come with an SD card?
Yes. All C2C devices come with a compatible SD card installed in the device.
Why is ResMed offering C2C devices?
C2C is ResMed’s temporary decision specifically aimed at alleviating the unmet needs of hundreds of thousands of patients worldwide waiting for ResMed PAP therapy during the current worldwide chip shortage.
How can I identify that the device is a C2C device?
Air10 C2C devices are identifiable by the following:
- Air10 C2C devices have unique model numbers
- Air10 C2C devices will have unique labeling
- When powered on, Air10 C2C devices will not have any cellular bars on the top-right corner of the home screen
Will I be able to use myAir app with these devices?
No. You will not have visibility to your therapy and usage data within the myAir app. The myAir app will not capture your sleep data from the Air10 C2C device.
How do I see my performance in therapy with my equipment?
You will be able to see your nightly data on the device's home screen each morning and view your therapy reports by accessing the Sleep Report menu on the home screen.
To have access to comprehensive therapy details within the Sleep Report menu, ensure that Essentials Plus is selected on the device. Essentials Plus can be enabled within the Clinical Menu by selecting Settings, followed by Essentials, and finally by selecting Plus.
Essentials Plus enables highly-engaged patients to access additional features, including changing mask type, EPR (if available), SmartStart, and Run Warmup.
Which accessories can I use with the Air10 C2C devices?
AirSense 10 C2C devices are compatible with all existing AirSense 10 accessories and components. Device accessories and components will have no change to current model numbers.
How will clinicians see how patients are performing on therapy with an AirSense 10 C2C device?
Clinicians will be able to use AirView to log data by manually downloading it off the device’s SD card.
Is this a travel-friendly machine? Is it heavy and can I remove the humidifier?
While not explicitly designed for travel, the AutoSet is actually a very transportable machine. The humidifier is completely removable, too; so if you are short on space or just don't like the humidifier, you can disconnect it from the machine easily.
Am I allowed to bring my AirSense on a plane?
Yes, you are: medical equipment does not count against an airline's luggage limit. Make sure that you don't fill your water chamber before the flight.
Will the old ClimateLine tubing work on the new C2C machine?
No, the old ClimateLine tubing is not compatible with the latest machine. It features different prongs.
*Note: Do not remove the SD card from the device when the SD light is flashing, because data is being written to the card.
Maintenance and Cleaning
Always wash your hands before touching any part of your machine.
- Disposable filter - found on the left-hand side of the machine behind the door with holes. Discard and replace each month. The filter keeps the air you breathe clean and protects the machine motor from dust buildup, as well.
- Tubing - hang to dry whenever you see moisture within it. Wash once a week. Soak in a clean sink of warm, soapy water. Choose a mild detergent in a scent you like. Rinse well. Hang to dry. (This applies to both heated and non-heated tubing.)
- Water chamber - Wash once a week, in a clean sink of warm, soapy water, and use a toothbrush to clean every corner. Lay to dry.
Replace your tubing and water chamber every 6 months to one year for optimal and bacteria-free therapy.
Return on warranty issues only.
Review by Pam Schmidt RRT, RCP
Registered Respiratory Therapist for Respshop
What do we talk about when it comes to CPAP? We talk about size, weight, noise level, and appearance. Whatever you may be looking for, the ResMed AirSense 10 AutoSet with HumidAir might be the sleep apnea machine for you.
Coming in at 10.04 in L x 4.57 in W x 5.91 in H, this AutoPAP or APAP sizes right up with the rest. The weight is less than 3 lbs with the humidifier attached. Compared to other Auto PAP Machines, the noise level is rather quiet. Users of this APAP seem impressed by how quiet it is compared to other auto Machines. ResMed has done a great job with its appearance, making it look like a clock radio.
Humidification seems to be the talk. ResMed has taken the AirSense 10 AutoSet humidification to the next level with ClimateLineAir heated tubing. This tubing helps maintain the temperature throughout the entire air circuit. You can set the Auto Climate Control mode, which takes into consideration the room temperature and adjusts the humidification delivered to the mask. This feature, along with the humidifier, should help with water in the tubing.
The humidifier’s heating plate is built so that its water chamber is directly attached to the machine. Its settings range between off and 8, with 8 being the highest level of humidification. When using humidification, it is essential to notice the water level within your tubing and mask. If you are receiving water droplets in either, you will want to decrease your setting on the humidifier. If you are waking up to a dry nose or mouth, it indicates that you need to increase your humidifier setting.
Other features that help this unit stand out are the AutoRamp, SmartStart, and Expiratory Pressure Relief. All three of these features are for comfort and convenience to help you fall asleep with ease.
AutoRamp allows the unit to sense when you are awake or asleep. Once you’re asleep, this neat feature will comfortably raise the air pressure to your prescription level, allowing a smooth transition from wakefulness to sleep. So, there is no need to suffer trying to adjust to high pressures when you can hit a button to allow a lower pressure that will ramp up over time to your prescribed pressure. This feature coupled with the Expiratory Pressure Relief makes for a comfortable night’s rest.
Expiratory Pressure Relief, which is a standard on all ResMed CPAP units going forward, is intended for comfort. While using the device, it can be difficult to breathe out against your prescribed pressure, causing you to stop therapy. Expiratory Pressure Relief helps by lowering the pressure during exhalation while keeping your airway open. This allows your breathing to feel more natural, allowing you to fall asleep faster.
SmartStart is added for convenience. Once you are in bed and have your mask on, start to breathe, and the unit will start. If you should take your mask off to go to the bathroom, the unit will sense it and shut off. This feature is terrific. It not only allows you to hop into bed and get yourself adjusted, but it helps so that you’re not leaning over constantly to turn your unit on/off.
So, here are the final thoughts and considerations regarding the ResMed AirSense 10 AutoSet. Even though this unit is smaller, lighter, and quieter, it’s not a travel unit. If you are a traveler, this unit will take up more space. You may like the travel bag that the unit comes with and find that the machine is smaller than the previous units you have used, but if you travel by plane, it is better suited for your carry-on luggage.
In my opinion, the ResMed AirSense 10 AutoSet has excellent features to help bring you to the next level of APAP therapy!
Why do you need heated CPAP tubing?
Review By Anne G. RPSGT, RST
Registered Sleep Therapist
Registered Polysomnographic Technologist for Respshop
The main reason for a heated hose is to avoid moisture buildup in the tube. If you use a fan at night or if your bed is near a window, sometimes the moisture from the humidifier can condense and pool in the hose before it gets to your airway.
When this happens, it can wake you up by creating a loud popping sound as the air blows past the water, and in some cases, it can cause what we refer to as "rain out" where the water starts to splash onto your face or pour into your nose. The heated hose insulates the air from the cooler temperatures in your room to avoid this. You can also adjust the heat in the hose for your comfort, which makes this a great upgrade to the standard hose!
- By Lily, Registered Respiratory Therapist
- User ManualDownload
- Patient Quick Start GuideDownload
- Travel LetterDownload
- FAA Compliance LetterDownload
|Model||37207, 37208, 37382|
|HCPCS Code||E0601, E0562, A7037, A9279|
|Data Storage Capacity||2GB|
|Data Viewing||Via browser based applications|
|Effective Bluetooth Range||N/A|
|Expect Service Life||5 years|
|Flex Modes||C-flex; A-flex|
|Flex Pressure Relief||0-3cmH2O|
|Operation Modes||CPAP, APAP|
|Power||100-240 VAC, 50/60 Hz|
|Power Consumption||53 Watts Typical; 104 Watts Peak|
|Sound Pressure Level||26.6 dBA|
|Weight with Battery||N/A|
|Water Chamber Capacity||380 mL to Maximum Fill Line|
|Machine Language Display||English default|
|Power Cord Length||6 ft|
|Rainout Reduction||Via Heated Hose|
|Waterless Humidification System||No|
|AC Power Supply||Yes|
|Pressure Range||4 to 20 cm H2O|
|AirView||37382 Only via card download|
|AirView's Remote Assist||No for 37382|
|Built-in Cellular Technology||No cellular module for Card-to-cloud version.|
|Ramp Time||0 to 45 minute (5 minute increments)|
|Starting Ramp Pressure||4.0cmH2O default|
|Dimensions||10 x 4.6 x 5.91 inches|
|Dimensions w Hum||10 x 4.6 x 5.91 inches|
|Weight of machine with Power Supply||90w (4.04 lbs)|
|Weight with Humidifier||2.75 lbs|
|Pressure Relief||EPR - levels 1 - 3, 1 is the minimum pressure relief and 3 is the maximum|
|Sound/Noise Level||26.6 dBA|
|Altitude Adjustment||Automatic Up To 8500 Feet|
|AC Power Supply Weight||1.30 Lbs|
|Smartphone App||Browser only|
|Warranty||2-Year Manufacturer Warranty|
|Data Card||SD card included|
|AC Power||100v-240v (50-60Hz)|
|DC Compatible||Yes, Battery is available separately|
|Extra Features||Compatible with all masks|
- ResMed AirSense 10 AutoSet CPAP Machine
- Built-in Heated Humidifier (Water chamber)
- SlimLine Tubing
- 90W Power Supply with AC Cord
- SD Card (inserted)
- SD Card Envelope (allows for easier tracking of SD cards)
- C2C addendum (included with user manual)
- Comprehensive User Manual
- 1 x disposable filter, inserted.
- Travel Bag
SOY DE MORELIA, MICHOACAN, MEXICO
ME LO PUEDEN ENVIAR? COSTO? FORMAS DE PAGO?
TIEMPOS DE ENVIO?
What is the voltage frequency? 50hz is ok?