ResMed AirMini F20 Setup Pack with HumidX F20
The AirMini Mask Setup Pack for ResMed's AirFit/AirTouch F20 Full Face Mask is a necessary set-up if you plan on using the AirMini Travel CPAP machine. Uniquely designed to be used in conjunction with the AirFit/AirTouch F20 masks, the AirMini F20 Setup Pack connects your mask and AirMini together using a special mask connector and tubing.
The setup pack includes an AirMini tube and an AirMini F20 connector to help you connect an existing F20 Full Face Mask to the ResMed AirMini. Simply replace the elbow from your mask with the one that comes in this kit to connect the mask to the included AirMini Tubing.
HumidX F20 Waterless Humidification Included
This setup pack includes the HumidX F20, a small heat moisture exchanger (HME) designed to provide comfortable and effective humidification without water. When users breathe out, heat and moisture from their exhaled breath are captured and stored within the HME's tiny paper ridges before reaching the mask's vent. When they inhale, this heat and moisture are then released, providing warm and comfortable air throughout the night.
FAQ
How do I clean the HumidX F20 Capsule?
The HumidX F20 Capsule does not need to be cleaned. Each capsule is individually packaged and can be used up to 30 days after opening.
How do I clean my AirMini F20 Connector?
Wash the connector weekly with warm water and mild soap. Rinse thoroughly under running water and air dry away from direct sunlight.
How do I clean my AirMini Tubing?
Wash the tubing weekly with warm water and mild soap. Rinse thoroughly under running water and hang to dry away from direct sunlight.
How often do I need to replace my AirMini Tubing and HumidX F20 Capsule?
Tubing should be replaced every 6 months and the HumidX F20 Capsule should be replaced after 30 days once opened.
You would need:
The Airmini tubing adapter, model: WQ22New
Non heated tube, mode: 19HHP72
Heat moisture exchanger, model : 5998
