ResMed Complete Oximetry Kit for AirSense 10 and AirCurve 10 CPAP and VPAP
This is the complete oximetry kit for ResMed AirSense 10 CPAP and AirCurve 10 BiPAP/VPAP machines. The kit includes an XPOD oximeter, a sensor clip, a 3M cable, a reusable soft finger sensor, and an oximetry module that connects your oximeter to your CPAP or BiPAP. The oximetry kit enables clinicians to monitor blood oxygen saturation non-invasively, allowing them to assess how you respond to CPAP or BiPAP therapy.
Oximetry data is stored in the device's SD card which may need to be purchased separately. Users can take their SD card to their provider, who can then access the oximetry data.
Note: Airview (ResMed's therapy monitoring program for providers) is required to view oximetry data. Users cannot see the recorded data on their CPAP/BiPAP machine or on their ResMed myAir mobile app.
Compatibility
This XPOD oximetry kit is only compatible with ResMed AirSense10 and AirCurve 10 machines. The prongs on the oximetry module connect exclusively to AirSense 10 CPAPs and AirCurve 10 VPAPs.
Reusable Nonin Pulse Oximetry Soft Finger Sensor - Medium Size
- Product preferred application: index, middle or ring finger; toes
- Designed for ultimate comfort - short-term/long-term monitoring
- Suitable for settings where SpO2 monitoring is required
- Durable silicone material (Latex free)
- Added flexibility for a secure fit
Specifications
Cable length..........................................................3 m (9.84 ft)
Digit thicknesses...................................................10-19 mm (0.4-0.75 inches)
SpO2 Accuracy (Arms Adult/Ped**).....................70 - 100% +/- 2 digits
SpO2 Low Perfusion Accuracy (Arms**)..............70 - 100% +/- 2 digits
Motion........................................................+/- 3 digits
Pulse Rate Accuracy (Arms**)............................18 - 300 BPM +/- 3 digits
Pulse Rate Low Perfusion Accuracy (Arms**)....40 - 240 BPM +/- 3 digits
Operating Temperature...................................................0oC to +40oC (+23o to + 104o F)
Storage/Transportation..............................-30oC to +70oC (-22o to +158oF)
Operating Humidity...................................................10% - 90% non-condensing
Storage/Transportation..............................10% to 95% non-condensing
** +/- 1 Arms encompasses 68% of the population. This information is especially useful for clinicians performing photodynamic therapy. Specifications are subject to change without notice.
FAQ
Is oximetry an integral part of CPAP or BiPAP therapy?
While some CPAP and BiPAP users monitor their oxygen levels during the night, the majority do not. Your physician will let you know if they need to monitor your oxygen levels while you are using CPAP or BiPAP therapy.
The insulation of the cord between the Module on the AirSense and the Xpod is falling off the cord. I would like to get the just blue piece (Xpod?) with the cord that attaches to the module in the AirSense. Do you sell that separately from the kit?
Thanks,
-Dave
This kit is compatible with the Airsense 10 series and Aircurve line of BIPAP machines only.
I wish to purchase this for myself to correlate events with my dropping blood ox and help adjust the Min and Max EPAP and PS.
