A replacement water chamber for use with the XT Heated Humidifier that is only compatible with the XT Heated Humidifier. The water chamber is easy to clean just lift the flap labeled PULL in order to gain access. It can hold up to 300ml of water.
The humidifier contains a silicone top that is not intended for removal during cleaning. It is strongly recommended that you do not remove the silicone top as it may damage the silicone portion.
1. Find the slot located on the chamber lid 2. Line the slot in accordance with the tab in front of the chamber base 3. Press the tab all the way through the slot 4. Place the lid downward onto the chamber base 5. When the lid proper placed and pressed down the PULL flap will snap into place.
No, it is only compatible with the XT Heated Humidifier.
For the XT Series units, leaks may result when the metal base does not connect to the chamber properly. To prevent this, make sure the metal base of the water chamber has been pushed to the end to have a good seal. In addition, the aging of the silicon on the metal base may also cause leakage. If this is the case, please contact your supplier for a replacement of either the silicon band or the one provided by the water chamber.