ResMed AirStart 10 Fixed Pressure CPAP
The ResMed AirStart 10 with HumidAir is one of the newest therapy devices in ResMed's Air series. It is an effective, low-cost, and basic device. It is simplistic to use for most users, and with all the basic features you'd expect in a premier CPAP machine, you will rest easy knowing you're getting outstanding quality. Equipped with a vibrant LCD display, you will have no trouble seeing at night and you will enjoy the accessibility of each setting. Another benefit is the light weight; as it is only 2.75 pounds, you have the flexibility to travel without all the unnecessary weight other machines often require. It is a great travel companion.
The AirStart is built on the idea of simplicity. Due to its basic design, this device is looking to target users in need of a second machine in the event of frequent travel or simply having a backup machine waiting in the wings for a rainy day. We've all been there before when it comes to searching for a machine that is simple without the extra gadgetry or unneeded features. Even so, features seen in past machines such as Exhalation Pressure Relief and built-in humidification are still included. There also is a Ramp setting, which sets up an increase in pressure prior to reaching your therapy pressure setting. This allows you to get acclimated to your machine each night. You can dictate the amount of time you would like before the machine goes into your set therapy pressure setting.
Expiratory Pressure Relief Along with Other Comfort Features
ResMed has carried over expiratory pressure relief (EPR) from their line of S9 models. EPR is an algorithm that works by decreasing the pressure at the beginning of each breath a user takes, and then subsequently limiting that pressure throughout exhalation. Patients can choose whether they want pressure to drop by one, two, or three cm H2O, and these pressure changes are made gradually so as to not awaken you while you undergo your therapy. EPR is also capable of detecting when you're in the midst of an unnatural respiration period: if an apnea lasts ten seconds or more, EPR stops and institutes your prescribed pressure setting until your breathing cycle recommences.
HumidAir Heated Humidifier
The new HumidAir humidifier features a slightly larger water chamber capable of holding up to 380 mL of water. The humidifier will help reduce some of the negative symptoms of CPAP therapy by propelling warm, moist air into your lungs. This helps prevent rainout, nasal congestion, and other unpleasant side effects. Patients who do not wish to have humidified air may opt to remove the humidifier from the machine entirely or simply not fill the water chamber. A great feature is the ability to warm-up the humidifier before use, allowing it to be warm even from the beginning of your therapy.
The ramp feature, long a standard in ResMed products, has been redesigned to help make therapy even more comfortable. In the ResMed AirStart 10 CPAP, you can still use the ramp to gradually increase pressure over a 45 minute interval. For the first time though, you now have the opportunity to delay the onset of the ramp from the beginning of your therapy. For users who dislike the sudden inflow of air pressure when they turn on their CPAP, the new ramp is ideal: simply program the ramp to start anywhere from five to forty-five minutes after you turn on your machine and you can delay the onset of any pressure at all! This will allow you to fall asleep without any incoming pressure, helping you fall asleep naturally.
Easy Controls, Innovative Display
Therapeutic accessibility remains a hallmark of ResMed's machines. There are no complicated menus or settings. On the display screen, the user is given the ability to change any settings deemed needing to be changed such as ramp time, humidity level, or EPR. Once everything is set the way the user likes, the display will show the settings you've chosen as well as the current pressure and level of humidity. Thereafter, it will have the display go black which keeps the room from being lit with extra lights that can oftentimes be unnecessary. When you wake up after your therapy you will see the hours of usage on display for you. Simplicity at its best; little navigation is needed to find this information!
The following functions are not included in this product: auto ramp, Smart Start, Climate Control, Remote Assist, Wireless Module, Myair, and Heated Hose. The included SD card records only hours used, mask seal, humidification indicators, and AHI.
- Start Pressure: 8 cm H2O
- Ramp Time: 20 mins
- Mask Type: Pillows
- Humidity Level: 4
- EPR: Off
- EPR for advanced event detection response
- Vibrant LCD Screen
- EPR(Expiratory Pressure Relief)
- Basic Controls
- Integrated humidification
- FAA approved.
The water chamber in the humidifier must be removed before it can take water. Do NOT try to fill the humidifier while it is attached to the device. The standard water chamber included is not dishwasher safe and should only be hand washed.
Return on warranty issues only.
AirStart 10 CPAP with HumidAir
Standard Tube (#14994)
90W Power supply with AC cord