Key Features:
- Compatible with Luna G3 CPAP, APAP and BiPAP Machines only
- Standard 6Ft Length
- 22mm Cuffs connect to all CPAP masks
- Prevents Rainout by maintaining a consistent tube temperature
The Luna G3 Heated Tubing is compatible with all Luna G3 CPAP and BiPAP machines. It is 6 ft long with a 19mm inner diameter and features 22mm cuffs which connects to all standard CPAP masks. To optimize comfort and prevent condensation, this heated tube boasts five adjustable temperature settings, which can be easily accessed and modified through the Settings menu on your Luna G3 device.
Note: The "Heated Tubing" option is only visible under the Settings menu when the heated tube is connected to the machine.
By Anne G. RPSGT, RST
Registered Sleep Therapist and Registered Polysomnographic Technologist for RespShop
anne@respshop.com
Heated CPAP tubing serves one primary purpose: preventing moisture buildup in the tube. The heated and humidified air from your CPAP machine cools as it travels from the machine to your face, leading to condensation buildup that, in extreme cases, result in water sloshing around in your hose and mask. If there is a draft nearby (e.g., you sleep with a fan on or near the window), or if you sleep with the AC on, the odds of this happening is even greater.
Condensation in your CPAP tubing is a problem as air flowing past the water droplets can create loud popping sounds that disrupt your sleep. Excess condensation or rainout can result in water splashing onto your face or even into your nose!
Using a heated hose solves these problems because the heated hose helps maintain a constant temperature throughout your CPAP circuit. This temperature control insulates the air inside the tubing from the cooler temperature in its surroundings. As an added bonus, you can even adjust the temperature in the heated hose for your comfort, making this a great
What is the recommended replacement schedule for the Luna G3 Heated Tube?
The Luna G3 Heated Tube should be replaced every 6-12 months, or as needed depending on the frequency of use and maintenance conditions.
How do I clean and maintain the Luna G3 Heated Tube?
The Luna G3 Heated Tube should be cleaned once a week using warm water and mild detergent. Avoid using harsh chemicals or cleaning agents such as bleach, as they can damage the tubing. We recommend using a hose brush to scrub the inside of the tube for a thorough clean. Rinse the tube out with running water and hang the tube up, allowing it to air dry away from direct sunlight.
How do I connect the Luna G3 Heated Tube to my Luna G3 CPAP/BiPAP machine?
1 x Luna G3 Heated Tubing