CPAP Tube Brush, Stainless

In Stock
Please choose a size.
Notify Me When It Is In Stock

Key Features:

  • Choose from Two Sizes: 22mm (for standard tubing) and 15mm (for slim tubing)
  • Multiple Lengths Available
  • Soft Nylon Bristles won't damage tubing
Product Details

CPAP Tube Brush Cleaner for CPAP Patients

This Tube Brush is designed specifically for cleaning the inside of your CPAP/BiPAP tubing. If left uncleaned, moisture inside your breathing tube can lead to mold and mildew growth. Using this tube brush helps prevent the accumulation of moisture in the hose, promoting optimal hygiene and extending the life of your tubing.

The stainless steel wire is both sturdy and flexible. It retains its shape even when threaded down the length of the hose, and it is flexible enough to give your CPAP hose a thorough scrubbing. If you've ever wondered how soaking your CPAP hose constitutes as "cleaning," stop wondering and pick up a tube brush to start actively cleaning!

Two Sizes and Multiple Lengths

This versatile CPAP tube brush comes in two sizes to thoroughly clean both standard (22mm) and slim (15mm) tubing. Multiple lengths are available.

If you have a standard tube, choose the 22mm diameter tube brush. The following lengths are available for the 22mm brush:

  • Standard (3.5 ft)
  • Long (5 ft)
  • Extra Long (6.5 ft)

If you have a slim tube, choose the 15mm diameter tube brush. Only 1 length is available for the 15mm brush.

  • Extra Long (6.5 ft)


  • Carefully unwind your tube brush while holding both ends.
  • If this is your first time using the brush, wash the brush with warm water and mild detergent and rinse with cool water.
  • Fill a basin or sink with warm water and add a few drops of mild detergent. Soak the hose in the warm, soapy water. 
  • Holding the tube as straight as possible to prevent damage, insert the tube brush into the tube. Gently brush the sides in short strokes, and slowly work further down the tube.  Once the tube brush is halfway down the hose, pull the brush out and insert into the other end of the hose to clean the other side. 
  • Thoroughly rinse the tubing with clean water to remove any soap residue.
  • Hang the hose up to air dry away from direct sunlight.
  • Gently pat your tube brush bristles with a towel, and hang to air dry.

Note: RespShop is not liable for damages resulting from incorrect cleaning procedures. The CPAP Tube Brush is marketed specifically for maintaining your CPAP tubing, and any unintended use is at your own risk. The manufacturer is not responsible for consequences resulting from misuse of their product.


Do the longer brushes have longer bristles?
No, the bristles are the same size regardless of brush length.

Which brush do I need to clean my ResMed ClimateLineAir tubing?
You will need the 15mm slim tube brush for the ResMed ClimateLineAir (for S10 and S11), ClimateLine (for S9) and Slimline tubing. 

Technical Data
3.5ft, 5ft, 6.5ft, 3.5ft-Slim, 6.5ft-Slim
3 ounces (varies depending on length)
5ft (varies)
Item Includes

1x CPAP Tube Brush in the selected size and length

Reviews (33)
5 of 5 Stars!
Eren E
Was this helpful?
Subject: great deal and a must have product
I was surprised to see this product on Respshop's page. Before this, I've always had trouble cleaning out my tubing/hose. It's such an awkward shape and difficult to clean with just my hands.
The tube brush comes with no instructions on use but I think it's pretty self explanatory how to use it. The product itself looks like a long, sturdy wire with a brush head attached to it. The wire came in a circular shape like in the picture but it can be adjusted and unraveled to meet how long your tubing is. I never found an issue with its size; I think it would probably fit most tubing out there.
The material is very high quality and I think it will last me a long time. I use my brush once every few days using warm, soapy water to clean out my tubing.
The price on Respshop is probably the best you can find anywhere. Great customer service as well. If you're new to cpap especially I recommend you get one of these brushes. They make cleaning so much easier.
Was this helpful?
5 of 5 Stars!
Was this helpful?
Subject: Cleaning brush
Perfect size and length to clean narrow slimline cpap hose. Support wire is stiff enough so it is easy to push through.
Was this helpful?
5 of 5 Stars!
andres c
(Verified Purchase)
Was this helpful?
great for cleaning well the inside of the hose, I do recommend to buy it and do it otherwise mold or bacteria can grow.
Was this helpful?
5 of 5 Stars!
Trisha M
(Verified Purchase)
Was this helpful?
Subject: CPAP tube brush
Respshop was very good about explaining how often to clean the equipment when I purchased my first CPAP and CPAP mask. The thoughts of bacteria growth on my mask, my tube and the water chamber was absolutely something I wanted to prevent. I have diligently cleaned my equipment weekly with warm soapy water. Respshop also told me about the replacement schedule for CPAP supplies. I do replace the mask cushion every 3 months and the tubing and water chamber every 6 months. The CPAP filter is replaced every month too. I am using Respshop's subscribe and save service for my supplies so that they were always here when I needed them. I am afraid I would forget to re-order so this service is terrific. However, the cpap tube gave me grief. I am really confident I have cleaned it properly. I spoke to Respshop's customer service about my concerns and they told me about the Cpap tube brush! Perfect! I now feel confident my tube is actually clean. Thank you Respshop for telling me about the cpap tube brush.
Was this helpful?
5 of 5 Stars!
Gus B
(Verified Purchase)
Was this helpful?
I could not believe that there is a product to clean the tube with, i have asked numerous times here in Australia until i saw the tube brush on your website, fits perfectly so glad i purchased it. Attention all Aussie;'s buy your CPAP products from Respshop & receive excellent service fast delivery & GREAT Prices!!
Was this helpful?
5 of 5 Stars!
Renetta S
Was this helpful?
Subject: RESSHOP
I like all the products I ordered and will continue to order. I will find out how to change companies. I want to continue ordering my supplies from this company. I like the products and the prices are very reasonable. Please look forward to my next order. THANKS, RS
Was this helpful?
5 of 5 Stars!
Maurice R
Was this helpful?
The tube is great and really cleans well. But I could not find in the package the directions how to use the tube, like with soap, what kind etc. Can anyone direct me. My email address: Thanks
Was this helpful?
1 of 5 Stars!
Theodore W
Was this helpful?
Subject: Tube strap support
Flimsy and overpriced. Made my own tube strap support using velcro for very low cost.

Hi there, this tube brush is designed to be maneuverable for cleaning the inside of a tube. This is not a tube strap support.

Was this helpful?
5 of 5 Stars!
Was this helpful?
Works fine, I use the brush twice and balean the tube awesome. It is good quality. If you want to be sure your tube is clean this is something you should buy.
Was this helpful?
5 of 5 Stars!
Marijn L
(Verified Purchase)
Was this helpful?
Subject: Helpful
This brush is small and long. I notice that my hose was in better shape after a clean with this brush. Respshop did a great job with the delivery, as always.
Was this helpful?
Showing 1 to 10 (of 33 reviews)
Q&As (4)
Have a question on this item? Ask here and we will answer it in 12-24 hours, usually in a few business hours! Questions and answers will appear here after we answer. You may also have email notifications.
Will the slimline (15mm) brush fit to clean a 12 mm hose?

No, it may not.

Was this helpful?
can the climate line heated tubing be cleaned with brushes

Yes it may.

Was this helpful?
What is the difference between regular and slim?

The difference is the tube size. Listed below
The tube brush comes in four different sizes:

3.5ft long, 22mm diameter
5ft long, 22mm diameter
6.5ft long, 22mm diameter
6.5ft long, 15mm diameter (for slimline tubing)

Was this helpful?
What is the diameter of the metal ring on the opposite end from the brush? I envision dropping the ring end of the brush through the CPAP tubing and pulling the brush through the tubing. Will the ring fit through standard CPAP tubing easily? Or is it designed to be oversized and not enter the tubing? Is the outside of the ring smooth so that it will not catch on or scratch the tubing?

Hi there, the ring is only meant to be the last part of the brush that you can hold onto when feeding the cleaning brush through your tubing. So that you can put your finger through and pull/push the wire brush through to clean the tube. It is not really mean for you to put the ring through and pull out the other end. You would generally switch sides and go through the other end to clean.

Was this helpful?
Showing 1 to 4 (of 4 questions)
How Can We Help You?
Our team is always here to support every part of your treatment.
call us
Call Us
We are here to help
chat with us
Chat with Us
Talk to a human, not a bot
email us
Email Us