Z2 Travel CPAP Machine - Manual by Breas
Small, Light, and Totally Integrated
The new single-pressure Z2 CPAP machine is small enough for travel yet, powerful enough for everyday use. This lightweight machine is perfect for travel just like its predecessor, the Z1. A major improvement is the sound volume. The Z2 uses an improved, quieter motor and the Q-Lite to muffle tube noises when delivering therapy. The Z2 has all the features of the Z1. Not only is this machine light and quiet but you can also use any mask with this machine. Take your favorite mask with you when you travel! If you need humidification, this machine offers tankless humidification with the included Heat Moisture Exchanger (HME). The HME recycles heat and moisture from exhaled air to simulate a humidifier.
Travel-Friendly Machine
Breas has designed this with the traveler in mind. Weighing only 10.3 ounces, it is one of the lightest CPAP machines on the market. Its 6.48" x 3.30" x 2.02" size allows it to easily fit in a backpack or suitcase. Compared to other, bulkier machines, it will take up far less space on a nightstand or tent.
Z-Breathe Exhalation Relief
The Z2 Auto Travel machine comes with comfort features you will find in any top-notch CPAP machine. The Z-Breathe Exhalation relief function reduces air pressure during exhalation, making it much easier to breathe against the incoming air. The device offers 3 levels of Z-Breathe for your comfort. You will be able to select whichever level is best for your CPAP therapy.
Heat Moisture Exchanger
Heat Moisture Exchanger One feature that sets Breas machines apart from other prominent CPAP machine brands is the heat moisture exchanger. Unlike other machines that commonly use water-based humidifiers, the HME can reuse heat and moisture from exhaling. The HME does not draw power like a water-based humidifier enabling usage with the PowerShell. The HME is another travel-friendly feature as you can have humidification without losing the compact size or worrying about distilled water.
Battery
The Z2 has an optional PowerShell for 8 more hours of battery life. This will add an extra night of use when power is limited. It can be purchased with or without the PowerShell.
Automatic Altitude Adjustment
Ideal for users traveling through mountains, the Z2 CPAP machine was built to automatically detect altitude and adjust therapy pressure accordingly. The machine is capable of operating from sea level to 8,000 feet above sea level.
Leak Compensation
The Z2 will detect minor leaks from your CPAP Mask and adjust its pressure accordingly. If you experience a mask leak, the device will ensure that your prescribed pressure needs are met. If there are major leaks, the device will let you know with an error message.
Download Dataviewer Software Here
Key Features
- Lightweight, ultra-small CPAP machine
- Compatible with optional PowerShell with Extended Life Battery
- Compatible with all standard CPAP masks
- Waterless humidification with included Heat Moisture Exchanger
- Z-Breathe comfort feature
- Auto start and stop feature
- Fixed pressure (single pressure)
- Compatible with all Z1 accessories
- FAA approved for in-flight use
FAQ
What are the differences from the Z1 model?
Although they are the same size and weight, the Z2 has an improved motor that is 29% quieter.
What are the differences from the Z2 Auto model?
The Z2 Auto is an auto CPAP machine, so it can automatically adjust the pressure level to follow your breathing cycle. This product, in comparison, is set to a certain air pressure, so it will not adjust to your changes. Both machines have Z-Breathe Exhalation Relief, but this only accounts for breathing out. The Z1 will always have the same prescribed air pressure when breathing in.
RX Required
- Quick Start GuideDownload
- User ManualDownload
- Z2 PowerShell GuideDownload
- QTube Insert GuideDownload
- HME Insert InstructionsDownload
Model | 717116 |
HCPCS Code | E0601, A7037, A7038 |
Data Viewing | Dataviewer Software |
Operation Modes | CPAP |
Qtube Included | Yes |
Z-Breathe | Yes |
Auto Stop | Yes. |
Pressure Range | 4 to 20 cm H2O |
Dimensions | 6.48 x 3.30 x 2.02 inches |
Weight | 10.4 ounces |
Ramp | 0-45 minutes |
Pressure Relief | Z-Breathe 1,2, or 3 (1 = Gentle, 2 = Moderate, 3 = Maximum Drop in Pressure at Exhalation) |
Sound/Noise Level | 26 dBA |
Warranty | 2 years |
AC Power | 100v-240v (50-60Hz) |
- Z2 CPAP machine
- Heat Moisture Exchange Unit (HME)
- Tube Adapter
- 4-foot Slim Style Tubing
- Q-Lite in-Line Muffler Kit
- 2 x Disposable Filters
- USB Cable
- AC Power Supply
- User Manual
- Quick Start Guide
Subject: No Aftersales
As of March 25, 2022, my order is still (April 4) in the UPS bonded warehouse. The Portuguese authorities do not allow the CPAP device into the European market because it is apparently not certified for Europe. Respshop has gone into hiding and is not helping. Respshop does not respond to emails.
Hi there, we have tried to reach out to you by email. Our last response was March 29th. UPS is still waiting for clearance details from you. If they are unable to obtain these required documents the device will likely be shipped back to us. Please reach out to us by calling 866-936-3754 or emailing: sales@respshop.com
Subject: HDM Z2 Travel Manuel CPAP
Loving it! Used it the first time and it worked perfectly. I was always worried that such a small machine couldn’t handle my needs but it did great. I was amazed how quiet it was. Now I’m thinking about ordering the power shell. I would like to know if it’s legal to carry on an airplane.
Subject: HDM Z2 Travel CPAP
Works great! Very compact. Zero performance issues. You’ll need a lot more space for your mask and tube than for this little baby!
Subject: Purchase of CPAP machine and supplies
Response was within hours so was the shipping. Definitely will continue to be a client and recommend to others.
Thank you.
Your Dreamwear mask should have a small white adapter piece which may still be in your other tube. You will need to remove it and place it back on your mask connection before attaching.