Fisher & Paykel’s myAIRVO 2
Looking for a replacement for your air compressor? Need a high flow system that is quiet and has a built-in flow generator to meet your humidification needs? Have a look at the myAirvo 2 humidification high flow system.
The myAirvo 2 is replacing the need to have a heavy air compressor that is noisy and heavy. It is very versatile and mobile for customers that need to travel. This unit can generate flows up to 60 lpm which can take you from the hospital to home. It is capable to deliver a warm humidified air with an easy to push button interface to adjust flow meeting your targeted air.
No more condensation in the tubing or interfaces. No more cold droplets or gurgling noise to keep you awake at night. myAirvo 2 will keep these problems at bay by using the AirSpiral Tube. This tube contains two spiral elements, the heating component that will allow warm air throughout the tube and the insulation component to keep temperatures even throughout the tube which can vary from the environment. The myAirvo can decrease condensation by 93% making this a unit to look at!
So, you say you use oxygen with your air compressor? No worries. The myAirvo 2 is compatible with any supplemental continuous flow system, up to 15 lpm, for anyone that is prescribed oxygen. Simply add an oxygen port and the built-in ultrasonic analyzer integrates the flow without special setup. Just remember if you think this system could help with your oxygen therapy, make sure to talk with your physician.
- Generates flows up to 60 lpm
- Easy to use display screen
- No condensation in the tubes or interfaces
- Can be used with oxygen up to 15 lpm Less noise then an air compressor
- AirSpiral Tube for warming air consistently through the tube
- Handy gribs on AirSpiral Tube to assist with stabilization
- Alarms for safety Temperature setting 37, 34 and 31 degrees C for comfort
- Integrated Temperature Sensor which eliminates probes, cables, or adapter
- Can be used with multiple interfaces
What type of patients is myAIRVO2 intended/indicated for?
myAIRVO 2 can be used on a wide range of patient types, ages, and disease states. In order to obtain myAIRVO 2, a patient must have a valid prescription from a healthcare professional. A HCP will be able to diagnose a patient’s situation and determine if myAIRVO 2 is the appropriate treatment.
I used AIRVO in the hospital, can I buy one to use at home?
myAIRVO 2 is FDA approved for use in the home and long term care. If you have a valid prescription from your healthcare provider, the myAIRVO 2 is available for purchase and use in the home.
Is myAIRVO 2 covered by insurances?
myAIRVO 2 can be covered by insurance depending on patient circumstance. Often times insurance companies will require proper documentation in order to pay for the device. Some of the information that insurance companies may or may not require include: valid prescription from healthcare provider, letter of medical necessity, prior authorization, peer-to-peer review.
Can I use my HSA/FSA to purchase myAIRVO 2?
Yes, myAIRVO 2 is eligible for purchase via both HSA and FSA.
How long is the breathing tube that comes with the device?
The AirSpiral Heated Breathing Tube for myAIRVO2 Humidified System is six feet long.
High Flow Therapy and COVID-19
High flow oxygen therapy has emerged as a valuable therapy for hospitalized patients with COVID-19. Home high flow therapy can be an adjunct to avoiding hospitalization or to earlier discharge home.
High flow therapy delivers heated and humidified gas flow at rates up to 60 liters per minute. The flow from the high flow unit reduces the patient’s effort of breathing. The flow may also generate some degree of positive end expiratory pressure in the lungs to supports lung expansion as well.
When used with supplemental oxygen, high flow also allows a fixed percentage of oxygen to be delivered, often at higher percentages than achieved by a standard nasal cannula.
myAirvo 2 system simulator APP
Download the myAIRVO 2 system simulator app and have this great learning/teaching tool at your fingertips.
Use the app to:
- Learn how to use the myAIRVO 2 device
- Teach others how to use the myAIRVO 2 device quickly and easily
- Test your skills
Reviewed By Pam Schmidt RRT, RCP
Registered Respiratory Therapist for Respshop
You are going to love the myAirvo 2. This new high flow humidification will have you jumping. It sets a whole new standard to humidification. It provides my patients with convenience and optimal performance for any patient needing high humidity. Whether you use a trach mask, face tent, or nasal pillows you are going to love this new humidification unit!
The myAirvo 2 is replacing the need to have a heavy air compressor that is noisy and messy. It is very versatile for customers traveling. It is capable to deliver a warm humidified air with an easy to push button to adjust flow meeting your targeted air. My clients love how warm the air is and how easy it is to run. No more messing around with water bottles leaking or condensation in the tubing. No more cold droplets or gurgling noise to keep you awake at night. The Airvo 2 will keep these problems at bay by using the AirSpiral Tube. This is great for my patients because they will not have to drain any tubing or worry about condensation flowing into their trach/mask area.
If you use oxygen with your air compressor, no worries. The myAirvo 2 is compatible with any supplemental continuous flow system, up to 15 lpm. Simply add an oxygen port and the built-in ultrasonic analyzer integrates the flow without special setup. Just remember if you think this system could help with your oxygen therapy, make sure to talk with your physician. It is so quick and easy to set up, do not waste any more time on the noisy cumbersome air compressor of the past. Update to the new Airvo2 or at least check it out!
- myAirvo2 Trouble Shooting Guide
- myAirvo2 Feature Sheet
- myAirvo 2 Setup Guide
- myAIRVO 2 Standard Warranty
|Dimensions||11.6 x 6.7 x 6.9 inches|
|Sound/Noise Level||45dbA @ 1m|
|Flow Rates||10-60 LPM (Default), 2-25 LPM (Junior Mode)|
|Altitude Adjustment||6000 ft.|
|Warranty||2 years (see warranty program)|
|AC Power||100-115 VAC, 50-60 Hz, 2.2 A|