DC Converter Charges S9 CPAP Machines, Humidifiers
The DC Converter 24V 90W for S9 machines enables you to power S9 CPAP Machines with any 12V or 24V power source. This includes car cigarette lighters!
Works with S9 Machines
The DC Converter works with the S9 AutoSet CPAP Machine, S9 Elite CPAP Machine with EPR, S9 Escape CPAP Machine with EPR, S9 VPAP Auto BiLevel machine, and S9 VPAP S BiLevel Machine.
Key Features
- Power Your Machine Anywhere
- Travel Friendly
- Now YOU Have the Flexibility
Battery Voltage: 12V or 24 VDC
Electromagnetic Compatibility: The product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC6061-1-2, for residential commercial, and light industry environments. Information regarding the electromagnetic emissions and immunity of this ResMed device can be found on www.resmed.com, on the Products page under Service and Support. Click on the PDF file for your language.
Reviewers Tip:
Charge it while you're traveling.
S9 Machines
FAQ
Does this come with any accessory equipment?
No, this is just the DC Converter cable. You can purchase other ResMed S9 Equipment from Respshop.
Compatibility
- ResMed S9 VPAP Auto
- ResMed S9 Elite with EPR and H5i Humidifier
- ResMed S9 VPAP Auto with H5i Humidifier
- ResMed S9 AutoSet CPAP and H5i Humidifier
- ResMed S9 VPAP Auto with H5i Humidifier and ClimateLine Tubing
- ResMed S9 AutoSet w/ H5i Humidifier & ClimateLine Tubing
- ResMed S9 AutoSet w/ H5i Humidifier & ClimateLine Tubing
- ResMed S9 Elite CPAP Machine with H5i Heated Humidifier & ClimateLine Tubing
- ResMed S9 Escape CPAP Machine
- ResMed S9 VPAP Adapt with H5i Humidifier & ClimateLine Heated Tubing
- ResMed S9 Escape Auto CPAP
- ResMed S9 VPAP ST with H5i Humidifier & ClimateLine Heated Tubing
- ResMed S9 AutoSet without Humidifier
- ResMed S9 Elite with EPR w/o Humidifier
- ResMed S9 AutoSet with H5i for Her
- ResMed S9 Escape CPAP Machine with EPR and H5i Heated Humidifier
- User Instruction GuideDownload
Model | 36970 |
Fuse | (Rating) 20A |
Length | (connector to connector) 2.3 m |
Output | 24V, 2.5A |
Power Consumption | 6.0A at nominal 12 V input. 3.0 A at nominal for 24V input. The actual current level will depend on pressure and humidification levels and breathing patterns. |
This actually is the complete set, it has those battery clips, too. They should update the picture to show those red&black alligator clips. Was worried a little, but this is the whole set in the original ResMed box. Thanks!
Captcha for doing you a favor? Seriously??