ResMed Mirage Activa LT Nasal CPAP Mask

Mirage Activa LT Nasal CPAP Mask by ResMed

A secure seal, freedom to move, and quick custom fit — the ResMed Mirage Activa LT offers all these and more.

Featuring ActiveCell™ cushion technology, the Mirage Activa LT automatically creates a gentle consistent seal, even as you change sleeping positions and therapy pressures.

It prevents you from overtightening the headgear and comes with a unique diffuser vent, which disperses air quietly for better sleeping comfort.

All you need is one hand to adjust the mask to your facial profile. The MicroFit dial offers 24 settings, allowing you to position the cushion and forehead support for an easy, customized fit.

Plus, the quick-release headgear clips allow for easy on and off, streamlining your bedtime routine.

General

Model

60182, 60148, 60149, 60150

HCPCS Code

A7034, A7035

Manufacturer

ResMed

Basic Features

Warranty

90 days against manufacturer defects

Tube Connection

Front of the face

Mask Type

Nasal

Headgear Features

Headgear Clips and Type

Yes, nonmagnetic

Headgear Size with Mask

Medium

Other Headgear Sizes Available

Small, Large

Other Headgear Styles Available

No

Size

Fit Pack Available

No

Lifestyle Needs

Active Sleeper

Yes

Stomach Sleeper

No

Glasses Friendly

No

Reduces Claustrophobia

No

Specifically Designed For Women

No

Facial Hair Friendly

No

Cushion Features

Cushion Interchangeable with Different Type

No

Spec Mirage Activa LT Components Card

Spec Mirage Activa LT Brochure

Spec Mirage Activa LT User Guide

Sizing Mirage Activa LT Sizing Guide

Compatible with CPAP and BiPAP machines from all manufacturers. AirMini users will need an AirMini Tubing Connector Adapter and a non-heated hose to connect their machine to the mask.

How do I clean my Mirage Activa LT Nasal Mask?

Weekly cleaning: headgear

Daily cleaning: cushion, frame with forehead support and dial, elbow, swivel

Disassemble the mask.
Hand wash all parts in warm water with mild soap. Avoid soaking the parts for more than ten minutes.
Use a soft bristle brush to gently scrub the vent holes.
Rinse each part thoroughly under running water and squeeze excess water out from the headgear.
Let the mask components air dry completely out of direct sunlight.

How often should I replace my Mirage Activa LT Nasal Mask?

To maintain the best fit and seal for your CPAP therapy, we recommend replacing the entire mask, including the headgear and frame, every 6 months.

The silicone cushion, however, may need to be replaced more frequently, typically every 2 to 3 months. Silicone naturally softens over time, which can affect its ability to create a good seal.

My Mirage Activa LT is leaking. What do I do?

Gently pull the mask away from your face and then release it, allowing the cushion seal to inflate and settle comfortably around your nose.
Make sure to clean both your mask cushion and your face, as facial oils can interfere with the seal.
Ensure you're wearing your Mirage Activa LT according to the fitting instructions in the user guide. The way you put on the mask significantly impacts the seal.
Adjust your headgear as necessary.
Try a larger or smaller cushion size.
Replace any worn out mask parts.

If your CPAP mask still leaks after following all those troubleshooting steps, a different mask style may be a better option. Feel free to contact RespShop for assistance in choosing a different mask.

What isn't entirely clear from description is that to get a leak-free seal, you don't have to pull the straps tight, you hold the thing slightly loosely off the face as the air comes from the machine and the passage of air pushes the soft thin silicon of the mask out to the face to make the seal. Comfortable.

I like this mask (activa LT mask). Best choice i made in 2012.

This headgear is very comfortable after using it for more than one year.

I have used this mask for well over a year. It took a short while to get used to but is now the best I have ever used.
Two things I have learned -

1. I run the 6 ft extension hose from the machine under my T-shirt when I sleep. It connects to the mask with an 18" short tubing section via a swivel joint and stays under control. The mask does not get pulled loose when i turn in my sleep. This seems like a small thing but is truly a huge factor. Prior to learning this I would often get woke up several times a night by the mask pulling free. NOTE - The short hose section must be purchased separately with a swivel joint.

2. The tension on the straps is critical. A very slight adjustment, even 1/8", in the velcro engagement area where the strap length is adjusted, can make all the difference between a goods night rest and misery. Also as the strap is used the elasticity is stretched and I have to adjust the tension every 60 to 90 days.

Good luck and don't give up hope. I have used a CPAP machine since 2001. It has helped me greatly.

Have used this mask for several years - one of the most comfortable ones I have ever used.

1 2 3

Frequently Asked Questions

Need more help? Feel free to contact us and our sleep gurus will be more than happy to help!

Contact Us