ResMed | AirTouch F30i CPAP Mask Cushion

The ResMed AirTouch F30i is a full face mask specifically designed for comfort in any position. Its top-of-the-head tube connection lets you comfortably sleep on your stomach (and change positions) without the tube getting in the way. Plus, it has a fabric-wrapped frame: Soft, breathable, and moisture-wicking for all-night comfort.

Weekly cleaning: headgear, frame, elbow

Daily cleaning: cushion

1. Disassemble the mask.
2. Soak the mask parts in warm water with mild soap. Avoid soaking for more than 10 minutes.
3. Use a soft bristle brush to gently clean the holes in the cushion and elbow.
4. Rinse all parts thoroughly under running water, squeezing out excess water from the headgear. 
5. Lay parts out to air dry away from direct sunlight.

To maintain the best fit and seal for your CPAP therapy, we recommend replacing the entire mask, including the headgear and frame, every 6 months.

The silicone cushion, however, may need to be replaced more frequently, typically every 2 to 3 months. Silicone naturally softens over time, which can affect its ability to create a good seal.

1. Gently pull the mask away from your face and then release it, allowing the cushion seal to inflate and settle comfortably under your nose and around your mouth.
2. Make sure to clean both your mask cushion and your face, as facial oils can interfere with the seal. 
3. Ensure you're wearing your AirFit F30i mask according to the fitting instructions in the user guide. The way you put on the mask significantly impacts the seal.
4. Adjust your headgear as necessary. 
5. Try a larger or smaller cushion or frame size. 
6. Replace any worn out mask parts. 

If your CPAP mask still leaks after following all those troubleshooting steps, a different mask style may be a better option. Feel free to contact RespShop for assistance in choosing a different mask.