Fisher & Paykel Vitera Full Face CPAP Mask

Vitera Full Face Mask by Fisher & Paykel

Designed for a better sleeping experience, the Fisher & Paykel Vitera Full Face Mask provides stability, adaptability, and breathability.

The lightweight, low-profile frame provides a zone of support using a stability bar, which works with the RollFit cushion to ensure an excellent seal, regardless of movement.

To maintain a quiet bedroom environment, the exhalation port on the frame blows exhaled air upwards and away instead of downwards.

Featuring VentiCool technology, the adjustable headgear allows heat and moisture to escape for enhanced comfort. It’s available in small* and medium/large sizes.

Need help adjusting the headgear and fine-tuning your overall fit? Make sure to download the Fisher & Paykel myMask mask fitting app (Apple and Android).

*Small headgear sold separately.

RespShop Product Review

By Susan – Certified Sleep Science Coach

When this mask came out, I was very impressed with the amount of research that had gone into this product! Fisher & Paykel shared with our company what exactly goes into creating a new mask, and I have to say it was impressive, to say the least. I took the Vitera CPAP mask home to give it a go.

I usually wear a nasal mask unless I have a cold or am reviewing a new mask, so my preference leans toward the nasal versions. I was pleasantly surprised by how comfortable the Vitera Full Face mask is. It is also imperative that my line of sight not be obstructed since I like to read in bed, and for a full face mask, this did the trick.

I like a couple of other things about this mask. In particular, the very comfortable cushion, which Fisher & Paykel call the RollFit XT Seal, really does roll or glide to stay in place as you move and auto-adjust to reduce leaks and pressure around my nose.

I also really like the headgear because it is adjustable in five areas. Once you have it adjusted to your liking, you have two quick-release tabs on the frame for easy release. They also allow you to take the mask off and put it back on without having to readjust it to fit again.

The VentiCool headgear creates a very stable yet cool feeling to the mask, which means no slipping around while you sleep. My final thought on this mask is that it is a very comfortable and convenient mask for CPAP users.

General

Model

VIT1SA, VIT1MA, VIT1LA, VIT1SMLA

HCPCS Code

A7030

Manufacturer

Fisher & Paykel

Basic Features

Warranty

90 days against manufacturer defects

Tube Connection

Front of the face

Mask Type

Full Face

Headgear Features

Headgear Clips and Type

Yes, nonmagnetic clips

Headgear Size with Mask

Medium/Large

Other Headgear Sizes Available

Yes, Small

Other Headgear Styles Available

No

Size

Fit Pack Available

Yes

Lifestyle Needs

Active Sleeper

Yes

Stomach Sleeper

No

Glasses Friendly

No

Reduces Claustrophobia

No

Specifically Designed For Women

No

Facial Hair Friendly

Yes

Cushion Features

Cushion Interchangeable with Different Type

No

Spec Vitera User Guide

Sizing Vitera Sizing Gauge

Compatible with CPAP and BiPAP machines from all manufacturers. AirMini users will need an AirMini Tubing Connector Adapter and a non-heated hose to use the mask.

How do I clean my Vitera Full Face Mask?

Weekly cleaning: headgear

Daily cleaning: cushion, frame, elbow, swivel

Disassemble the mask.
Soak all parts in warm water with mild soap for up to ten minutes.
Rinse each part thoroughly under running water, squeezing out excess water from the headgear.
Air dry all parts away from direct sunlight. Lay the headgear flat to dry, or you can hang to dry.

How often should I replace my Vitera Full Face Mask?

To maintain the best fit and seal for your CPAP therapy, we recommend replacing the entire mask, including the headgear and frame, every 6 months.

The silicone cushion, however, may need to be replaced more frequently, typically every 2 to 3 months. Silicone naturally softens over time, which can affect its ability to create a good seal.

My Vitera Full Face Mask is leaking. What should I do?

Gently pull the mask away from your face and then release it, allowing the cushion to inflate and settle comfortably around your nose and mouth.
Make sure to clean both your mask cushion and your face, as facial oils can interfere with the seal.
Ensure you're wearing your F&P Vitera according to the fitting instructions in the user guide or refer to the F&P myMask app. The way you put on the mask significantly impacts the seal.
Adjust your headgear as necessary.
Try a larger or smaller cushion or headgear size.
Replace any worn out mask parts.

If your CPAP mask still leaks after following all those troubleshooting steps, a different mask style may be a better option. Feel free to contact RespShop for assistance in choosing a different mask.

Is the F&P Vitera a good choice for users with facial hair?

The Vitera generally seals well with facial hair, although this depends on the style. To improve the seal between the cushion and skin, we suggest using a CPAP mask liner and/or keeping facial hair trimmed.

I love the Vitera Full Face Mask by Fisher and Paykel this company is a go to for me. I switch between the Bravida nasel pillows. This has a silky soft cushion when it touches my face. One thing missing is the air diffuser! One improvement in next generation mask, please to have an air diffuser.

I like this mask! It's comfortable and quiet. It's also easy to don, doff and clean.

I have been trying to get used to this machine for almost a year.. trying various masks, styles, sizes, with no positive outcome. Finally, with this mask, comes relief... it's comfortable, stays in place, Finally! for me? this one works.

I've used a CPAP for over 20 years and this is the first mask I have liked. Because of COVID and the need for a new sleep study, my insurance won't cover a new face mask so I bought this one on recommendation of Respshop. This mask doesn't leak and the head gear doesn't shift like other masks. I used to wake up several times during the night just to re-shift the head gear so my mask wouldn't leak. Now it is a lot less. I like that a lot. My insurance company never gave me a facemask option. They don't care about the fit, but if you have options I recommend trying this one and others to see what works best for you.

I was very pleased at the speed in which my order was processed and shipped. Excellent service!

1 2 3

Frequently Asked Questions

Need more help? Feel free to contact us and our sleep gurus will be more than happy to help!

Contact Us