AirFit N20 by ResMed With Headgear
InfinitySeal™ Nasal Cushion
The ResMed AirFit N20 Nasal Mask seal is suited to fit 99% of all unique facial structures and provides some of the best comforts for your sleep apnea therapy. With specially-designed loops and varied thicknesses, this design helps prevent leaks or blowouts.
Multiple Sizes Available
The AirFit™ N20 is available in multiple sizes and there is a size gauge available so you can determine which would be the best fit for you.
Soft and Flexible Frame/Magnetic Clips
The AirFit™ N20 comes with soft plush headgear and a flexible frame that sits underneath your eyes and allows clear visibility for those nights when you want to read a book or sit up and watch TV. The frames adapt to different face types while the integrated padding offers softness for a better night's sleep. One of the most popular features of the mask is the magnetic clips which guide the headgear to the frame quickly and easily.
Quick Release Elbow
The quick-release elbow makes it easier for you to disconnect and reconnect the mask from the tubing without having to take the complete mask off, allowing you to get up during the night without having to worry about re-adjusting any straps.
How often should you replace the AirFit™ 20 mask?
In order for the mask to continue giving you the best sleep apnea therapy available, we recommend that you replace the silicone cushion every 1 month. Mask tubing should be replaced every 3 months and headgear every 6 months.
How to find out what mask size you would need for the AirFit™ 20 series?
The AirFit™ series has a size gauge template available from the Size Gauge tab above to make sure you find the best fit for you.
Note: the N20 cushion is interchangeable. Different cushion sizes are compatible with the same N20 mask frame.
Mask Material List :
- (Cushion Assembly): Silicone Elastomer and Polycarbonate
- (Elbow Assembly): Polypropylene, Thermoplastic Elastomer, Talc Filled Polypropylene
- (Frame Assembly): Polypropylene, Polycarbonate, Nylon/Elastane, Polyurethane Foam, and Metal Plated Magnet
- (Headgear): Nylon/Elastane and Polyurethane Foam
- (Headgear Clip): Polycarbonate and Metal Plated Magnet
- (Short Tube): Polypropylene, Thermoplastic Elastomer, Polycarbonate, and Polyester
Mask Fitting from ResMed:
- Remember to print your ResMed sizing gauge to scale. You’ll have to trim your guide from the paper.
- Once you have your sizing gauge:
- While in front of a mirror, hold your sizing gauge to your face. Trial each sizing option
- The most comfortable sizing option will provide your best fit.
Fitting your AirFit N20
- Un-clip the magnetic clips.
- With the mask held against your face, pull the headgear over your head.
- Bring each of the magnets up to meet their corresponding clips on the frame.
- Adjust the tabs on the upper headgear.
- Adjust the tabs on the lower headgear.
- With your device still switched off, connect your device tubing to your mask elbow.
- Connect the elbow to your mask.
- Switch on your therapy device.
|
AirFit Nasal Mask |
N10 |
N20 |
|
Frame |
Soft, clear silicone - fits all cushion sizes |
Integrated padding, flexible and light, soft to the touch - fits all cushion sizes |
|
Cushion (~ Mirage FX) |
InfinitySeal |
Polished surface InfinitySeal – conforms and molds to the contours of your face |
|
Elbow |
Rubber squeeze tabs |
Sturdier squeeze tabs, less noisy diffuser |
|
Headgear |
Lightweight, breathable, and durable with magnetic clips |
Lightweight, breathable, and durable with magnetic clips and extra padding |
Note: Magnetic clasps are not recommended with Pacemakers
RX Required
AirFit N20 Nasal Mask in the selected size
Mask #63501 - Cushion(63551), Frame System(63555), Headgear(63561)
Mask #63502 - Cushion(63552), Frame System(63556), Headgear(63561)
Mask #63503 - Cushion(63550), Frame System(63553), Headgear(63561)
Starter Pack #63535 - S/M/L Cushions (3 cushions), Frame System(63555), Headgear(63561)
Based on 19 reviews
Subject: AirFit N20 CPap Mask
I love this mask, the best one out of the ten since 2004. Respitech always comes out with better innovation over the years.
Subject: My CPAP machine
First when I ordered the CPAP machine I got the nasal one, ( Pillow) I was completed satisfied so I ordered the N20 . It more restrained but for me it work better . I toss and turn a lot there for the pillow type did not work. I have been satisfied so far, my mouth and nasal do get a really dry. Trying to work through it by keeping mints or caught drops beside my bed. Hoping this helps me , I had stopped breathing so many time during the night . I have been working with a lady at ResMed by the name of Patty , I am satisfied so far. I contact them directly to order supplies and ask questions ,not on the web, or email them . So far so good.
Subject: New mask and head gear
The new mask and head gear is working out really well. There is much less adjusting in the middle of the night
Subject: Comfortable and easy to get on/off
This mask and headpiece stays put better than some others I’ve used. The nasal covering is comfortable and the head gear is a snap to put on or take off.
Subject: AirFit N20
ResMEd masks seem to get a lot of love and after buying the N20, I agree. It's well made but also lightweight. Secures/seals well and is also comfortable. Highly recommend.
Subject: GREAT MASK
I was looking for a mask to upgrade from the AirFit N10 and figured checking out the N20 was the logical next step. AirFit products have always been quality for me so I had no fears about purchasing the N20. It was advertised as being quieter and more comfortable, and so far it’s lived up to those promises.
The nasal cushion is excellent, it seals just as well as my N10 one did. I would also argue it’s more comfortable and holds on better. Before I would occasionally have slippage on off nights but I haven’t had any of those wit the N20. The new diffuser design is also whisper quiet which is great for me and my partner.
The frame is also great. It’s well-padded, lightweight, and spreads out the pressure evenly. It also holds on very well and is a cinch to take off thanks to the quick release mechanism. The elbow has quick release tabs too so it’s easy to eject the hose when you have to do a quick errand. It’s been easy to adjust and as such, I haven’t had any issues with fit and feel. Make sure to use the size gauge to find the right size cushion for you.
Long time Airfit F20 here, I’m a huge advocate of Resmed products. Decided to give nasal masks a try recently and naturally, I picked up the N20. So far it’s been great, all the glory of the F20 with an excellent nasal cushion.
The features that made the F20 my favorite mask are here as well. Magnetic clips make taking the mask off a cinch, and helps prolong the longevity of the Velcro straps. Headgear is soft, light, breathable, and fits well. Well designed to hold the head and mask in place. Quick release elbow on the air feed tube is probably your quickest way to disconnect for midnight excursions.
Of course, the part that changed for me is that the N20 is a nasal cushion rather than full face. Resmed really makes great cushions and these are no different, supremely comfortable. Fits without issue, didn’t have any leakage issues from day 1. Sizing gauge on Respshop was very accurate as well, I’m very certain that I picked up the right size cushion right off the bat. Easy to clean too, I just run it under some warm water and let it air dry. They recommend that you replace the cushion every month but my experience is that it can last some time longer than that.
Resmed is always top of the class in my opinion. The N20 is just another excellent product in their lineup and it’s quickly even supplanting my longtime F20 as my favorite mask. You can’t go wrong either choice.
I'm pretty new to the whole CPAP thing, but I heard good things about the Airfit N20 from some of my buddies and decided to give it a try. First things first, this mask was a little on the uncomfortable side for me. In all honesty, this might be because I'm new to CPAP in general, so take my experience with a grain of salt.
Otherwise, I would say this mask is pretty ideal for me. Setting up the mask was very intuitive even for me, and I'm able to use my mask without much trouble when I browse my phone before bed. The mask definitely does its job when I'm sleeping. I usually set my pressure on the lower end, and I haven't noticed my mask leaking yet. Also, I sleep on my back, but I haven't really noticed any lines on my face in the morning. A lot of my friends talked about that, so I feel lucky to not really be experiencing that problem.
I'm still on the search for a more comfortable mask, but for now, I'll continue using my Airfit N20. I'm pretty happy with this mask.
Like the product very well lightweight easy for a night but being a mouth breather have a hard time with the chinstrap. If there was a way to add a chinstrap to the mounting piece it would be fabulous.
It is quite comfortable and connect to my small airmini,
Will there be a replacement tube for this available any time soon? It has a short tube that clips into the mask, then plugs into the main hose from the CPAP. There are many hoses available, but not this one. That hose becomes troublesome because it develops mold easily from all the exhalation, and it is not easy to clean. I feel like replacement is necessary!
Thank you,
The mask keeps blowing air out of the vent cap.
The pressure increases to much, when it is set on auto. I HAVE A MASK THAT COVERS THOSE HOLES AND IT WORKS FINE. DID I get the wrong mask?
Thanks
Si no fuera así, tienen alguna para recomendar.
Saludos Juan
Thank you,
Jeff S
