Fisher & Paykel

Fisher & Paykel myAirvo 2 Oxygen Inlet Kit

Model # 900PT422
$59.99

Pickup available at RespShop

Usually ready in 1 hour

Starting at $9.99/mo with . Check your purchasing power

30-Day Easy Return. Details

Genuine Fisher & Paykel Product

What’s included

1x myAirvo 2 Oxygen Inlet Kit

Fisher & Paykel myAirvo 2 Oxygen Inlet Kit

The myAirvo2 Oxygen Inlet Kit is required to connect supplementary oxygen to the Airvo 2/myAirvo 2 Humidified High Flow System

Note: Oxygen must only be added through the oxygen inlet port on the back of the myAirvo2 unit. To ensure that oxygen enters the unit correctly, the oxygen inlet port must be fitted properly to the filter holder and the filter holder must be fitted properly to the unit. The power cord connector should also be well-secured.

Do not connect more than 60 L/min oxygen to the oxygen inlet port.

Installation Instructions

  1. Ensure that the power cord connector is well secured to the rear of the unit- if necessary, secure with a cable tie.
  2. Clean and dry the side of the unit.
  3. Push the end of the tubing  0.3 inches (1 cm) onto the filter holder.
  4. Remove the adhesive label and firmly attach the oxygen inlet port to the myAirvo 2 unit.
  5. Wait 24 hours before use to allow the adhesive to set.

For detailed instructions, please refer to your myAirvo2 User Manual. 

General
Model
900PT422
HCPCS Code
E1399
Manufacturer
Fisher & Paykel

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

The RespShop Difference

Professional Service Team

Our team is composed of registered respiratory therapists and certified polysomnographic technologists.

Financing Plan Available

You may be eligible for no down payment and a low interest rate for 12 months.

Rewards Points Program

Get rewards points with every purchase. Use your points to save on future orders.

30-Day Risk-Free Exchanges

Rest peacefully with our 30-Day worry-free mask exchange program.