AirMini F20/F30 Setup Pack with HumidX F20
The AirMini Mask Setup Pack for ResMed's AirFit/AirTouch F20 and AirFit F30 mask is a necessary set-up if you plan on using the AirMini travel CPAP machine. This was uniquely designed to be used in conjunction with the AirFit/AirTouch F20 and AirFit F30. The AirMini F20/F30 setup pack connects your mask and AirMini together by using a special mask connector and tubing. Please note that this set-up is only compatible with one another and no other mask will suffice. It is not compatible with other masks or machines on the market.
Inside the Package
The setup pack includes an AirMini tube that connects the F20/F30 Full Face mask to the ResMed AirMini travel machine. If you are an existing AirFit/AirTouch F20/F30 user then you can use this set-up pack to connect it to your AirMini seamlessly.
Simply remove the existing elbow from your mask and connect the one that comes inside this kit. Again, keep in mind, this is only compatible with the AirMini CPAP machine.
The AirMini travel machine is compatible with only five masks which all have their own setup pack available, in addition to this, the AirMini is also only compatible with one certain type of tubing. If you have a different full-face mask other than the F20/F30 or different tubing, you will need to use the F20/F30 mask, with the AirMini tubing and connector in order for this machine to work.
HumidX F20 Waterless Humidification Included
This Setup Pack comes with the HumidX F20. It is a small heat and moisture exchanger (HME) designed to provide comfortable and effective humidification without water. When users breathe, heat and moisture from every exhale are captured and stored within the HME's tiny paper ridges before it reaches the mask's vent. When they inhale, this heat and moisture are released into warm and comfortable air during the night.
The HumidX F20 waterless humidification capsule is only compatible with AirFit and AirTouch F20 Full Face Masks. Currently, no HumidX capsule is available for the AirFit F30 Full Face Mask.
FAQ
How do I clean the HumidX F20 Capsule?
The HumidX F20 Capsule does not need to be cleaned. Each capsule is individually packaged and can be used up to 30 days after opening.
How do I clean my AirMini F20 Connector?
Wash the connector weekly with warm water and mild soap. Rinse thoroughly under running water and air dry away from direct sunlight.
How do I clean my AirMini Tubing?
Wash the tubing weekly with warm water and mild soap. Rinse thoroughly under running water and hang to dry away from direct sunlight.
How often do I need to replace my AirMini Tubing and HumidX F20 Capsule?
Tubing should be replaced every 6 months and the HumidX F20 Capsule should be replaced after 30 days once opened.
1 x AirMini Tube
1 x AirMini F20/F30 connector
1 x HumidX F20 Waterless Humidification (Only compatible with AirFit/AirTouch F20 masks, NOT compatible with the AirFit F30 mask)
The HumidX F20 waterless humidification capsule is only compatible with AirFit and AirTouch F20 Full Face Masks.
Currently, no HumidX capsule is available for the AirFit F30 Full Face Mask.
You would need:
The Airmini tubing adapter, model: WQ22New
Non heated tube, mode: 19HHP72
Heat moisture exchanger, model : 5998
