Small ResMed AirFit N20 Nasal Mask - OPEN BOX
Read more about this product here.
Prescription Required
Weekly cleaning: headgear, frame
Daily cleaning: cushion, short tube and elbow
Daily cleaning: cushion, short tube and elbow
- Disassemble the mask.
- Soak the mask parts in warm water with mild soap. Avoid soaking for more than 10 minutes.
- Scrub the vent holes on the elbow with a soft bristle brush.
- Rinse all parts thoroughly under running water, squeezing out excess water from the headgear.
- Lay parts out to air dry away from direct sunlight.
To maintain the best fit and seal for your CPAP therapy, we recommend replacing the entire mask, including the headgear and frame, every 6 months.
The silicone cushion, however, may need to be replaced more frequently, typically every 2 to 3 months. Silicone naturally softens over time, which can affect its ability to create a good seal.
The silicone cushion, however, may need to be replaced more frequently, typically every 2 to 3 months. Silicone naturally softens over time, which can affect its ability to create a good seal.
Yes, the AirFit N20 is also compatible with the AirTouch N20 memory foam cushion, allowing you to choose the cushion material you find most comfortable.
Facial hair can affect the seal of the AirFit N20 cushion as well as the ability of the mask frame to stay in place. We recommend using a mask liner and/or keeping facial hair trimmed to improve the seal between the cushion and skin.
Learn how the AirFit N20 compares to the AirFit N10, N30 and N30i nasal masks in our comprehensive ResMed Nasal Masks Comparison Review.
- Gently pull the mask away from your face and then release it, allowing the cushion seal to inflate and settle comfortably around your nose.
- Make sure to clean both your mask cushion and your face, as facial oils can interfere with the seal.
- Ensure you're wearing your AirFit N20 mask according to the fitting instructions in the user guide. The way you put on the mask significantly impacts the seal.
- Adjust your headgear as necessary.
- Try a larger or smaller cushion size.
- Replace any worn out mask parts.
General
Model63503 - OPEN BOX
HCPCS CodeA7034, A7035
ManufacturerResMed
Compatible with CPAP and BiPAP machines from all manufacturers. AirMini users will need to purchase the AirMini N20 Mask Setup Pack in order to connect their N20 CPAP mask to their machine.
Questions? Ask here.
We typically respond within 12-24 hours, often sooner. You'll receive email notifications once answered.
Share your review with our customers and earn $2.00 worth of points!