DreamStation Humidifier Flip Lid Latch

Home > CPAP Supplies > Water Chambers and Parts❮ Back to Water Chambers and Parts

Key Features:

Replacement Flip Lid Latch for Philips Respironics DreamStation CPAP and BiPAP Humidifier

Product Details

DreamStation Humidifier Replacement Flip Lid Latch by Philips Respironics

This Replacement Flip Lid Latch is designed exclusively for the DreamStation Humidifier . It is not compatible with the DreamStation 2.

Installation Instructions

1. Remove the Water Chamber Assembly.
2. Pull the Back Panel away from the Humidifier while lifting up on the top to release the Back Panel tab from the latch area.
3. Remove the Back Assembly and open the Flip Lid.
4. Push up on the 2 Latch tabs and pull the Latch out of the Humidifier Assembly.
5. Align the Latch into the Bottom Assembly grooves.
6. Push up on the Latch tabs while pushing the Latch until it clicks into place.
7. Verify the Flip Lid latches into place.
8. Align the Back Panel onto the bottom Assembly.
9. Secure the Back Panel with the four screws.
10. Verify the Back Panel is fully seated and secure.

Technical Data

Model

1121569

HCPCS Code

E1399

Item Includes

1x Flip Lid Latch

Reviews (1)

3.0 out of 5 stars

Write a review

5 star

4 star

3 star

100%

2 star

1 star

04/14/2023

Larry W

Was this helpful?

Subject: Flip lid latch
Well purchased latch, latch came promptly, latch not issue - obviously some type of spring is needed which I understand is not available. $18 and still no luck - Oh Well.

Was this helpful?

Showing 1 to 1 (of 1 reviews)

Q&As (5)

Have a question on this item? Ask here and we will answer it in 12-24 hours, usually in a few business hours! Questions and answers will appear here after we answer. You may also have email notifications.

Ask a question

Question

For those of you others woth the same problem as I have, this part does NOT fix the problem of the lid popping open due to a loss of the "spring like" pressure on this latch. This isn't the part that is breaking. And of course, the part that breaks of course isn't sold as a separate repair part anywhere I have yet found.

Answer

I see your order from 2022 for this item. I am sorry it was not the part you needed. Manufacturers do not make every part available for sale unfortunately.

Asked on 01/23/2024

Was this helpful?

Question

Why is the part for the most common fault with this humidifier not for sale? The humidifier uses a piece of plastic to flex to make the latch close. This piece of plastic will eventually break. This is a design flaw, they should have used a metal spring! I hope this company let's Philips know they have a lot of unhappy consumers. It could be such an easy fix if the part was made available.

Answer

This part is available for purchase. https://www.respshop.com/cpap-humidifiers/parts/respironics-dreamstation-humidifier-flip-lid-latch-p-1237.html#tab-9

Asked on 04/24/2023

Was this helpful?

Question

The latch on my dreamstation humidifier no longer latches so the lid opens and causes a huge air leak. I have to put something heavy on it to hold it down. Would the flip lid latch replacement work in this case?

Answer

It depends on which dream station you have, are you referring to the dreamstation 1 or Dreamstation 2?. This is for the dream station 1, if you look at photo 2 it shows the internal part that goes into the blower to help seal the latch due to wear. It will help secure the lid down. In some cases it works if this is the issue at hand.

Asked on 06/23/2022

Was this helpful?

Question

My Dreamstation humidifier lid latch still opens and closes but without a spring or pop like it used to. Will a new latch change that or is it likely an internal spring issue?

Answer

The latch could very well be the concern. This would be your best choice in addressing the issue as the latch may no longer be catching and holding like it used to.

Asked on 05/07/2021

Was this helpful?