Ultra Mirage Full Face Mask
Often times a number of CPAP users and almost all bi-level users suffer from flu-like symptoms, less effective therapy and poor sleep. This can be the result of a loss of treatment pressure due to mouth breathing or a mouth leak. The ResMed Ultra Mirage full face mask stops this loss so you get more comfortable and effective therapy. Additionally, if you have a stuffy nose or prefer to wear a mask when you have allergies or a cold - the Ultra Mirage full face mask is a ideal mask that you can wear every night.
- Proven Mirage cushion technology provides an excellent seal without discomfort.
- Forehead pads conform to the contour of your face to enhance stability and comfort.
- Specially designed to minimize air loss.
Forehead Support and Flexible Pads
The New Ultra Mirage Forehead Support has four adjustment positions to optimize seal and comfort. Flexible forehead pads is essential to the contour of your forehead to provide stability and comfort.
Effective Cushion Technology
Mirage Cushion Technology has a magnificent seal without tight headgear so you don't need to face pressure sores and discomfort, and creates great sleep apnea therapy.
Set and Forget
New Set and Forget Headgear need only fitting once so you don't need to adjust the headgear everytime they put their mask on.
New top and bottom headgear clips makes it putting the mask on and taking it off fast and easy so you have less fuss and more confidence.
Superior airflow and built-in air vents provide excellent carbon dioxide washout to ensure effective therapy, even at low pressures.
Mask Material Components
Frame - Polycarbonate
Cushion clip - Polycarbonate
Swivel - Polycarbonate
Elbow - Polycarbonate
Swivel clip - Polycarbonate
Elbow Retainer - Polycarbonate
Forehead Support - Polycarbonate
Headgear clip - Polyester
Ports Cap - Polycarbonate
Forehead pad - Silicone Elastomer
Cushion - Silicone Elastomer
Valve membrane - Silicone Elastomer
Headgear Foam Layer - Open Cell Polyurethane
Headgear Loop Material - Nylon; Spandex
Headgear Fastener Tabs - Polycaprolactam
Headgear Underside Fabric - Nylon; Spandex
Headgear Cloth label - Rayon Acetate Satin
The Ultra Mirage full face mask is ideal for anyone needing a tight and secure seal that maximizes treatment pressure - resulting in more effective therapy.
When and how should I clean my mask?
Wash the Ultra Mirage CPAP Mask system daily with warm, soapy water. Rinse well and allow to air dry.
What is the best way to adjust my mask for a proper fit?
It's always best to fit the Ultra Mirage CPAP Mask while you are in your sleeping position.
If the electricity goes off while I sleep, will I be able to breathe through my full face mask?
Yes. ResMed masks have a special anti-asphyxia valve that opens if your PAP device loses power. In the event of a power failure, this feature allows you to breathe room air.
How about it part of my mask breaks?
There are replacement parts that you can get for this mask, such as cushions, clips, headgear and much more, you can find this list under the 'parts' tab.
ResMed Forehead Pad for Ultra Mirage II, Activa/Activa LT, SoftGel, Micro Nasal CPAP Masks, Quattro and Ultra Mirage Full Face CPAP Masks$6.00
|Model||60600, 60601, 60602, 60603, 60604, 60605|
- Full Face Mask
Subject: Second mask, it must be about me.
This is the second mask that I have gotten over the last month. Both were very loud when using them. I do have a higher pressure set on my CPAP, so that is probably the reason.
They both have been great quality and I have gotten great service from Respshop. Everything I have ever gotten from them has been of great quality. They are a great bunch to work with.
Subject: Good build
This mask is really sturdy and has held up for me well over the years. It's not too fancy but it doesn't leak and doesn't feel uncomfortable, which is all I need. I hope they'll keep the mask and its parts in production for a long time, even if it's an old design.
This is a good mask that I’ve used for many years now. It’s a very plain, straightforward mask but I have to give it big props for durability and part replacement.
The headgear is normal, it holds the head well and adjusts fine. Material is a little bit hot but nothing super bad, I can handle a little bit of heat on my head. I really like that there’s 4 clips, meaning it’s really easy to take the mask off without having to use the Velcro. This helps keep the Velcro alive longer but over some time the strap loses some elasticity anyways. As such I’ve had to buy replacements, but the great thing is the harness only costs 16 dollars. This is very cheap for a strap system and I have no problem replacing it every half year to year.
Cushion is normal. As long as I tighten my mask well, it holds the seal well and I’ve had very few leakages over the past years. There is a nasal bridge thing that holds on to the forehead, and I will admit that it’s very bulky. You’re not going to be reading books or watching TV without trouble. However, the forehead pads are very large and supple, so it feels quite comfortable.
Overall, a very solid mask. Durable and easy/cheap to replace the parts. Leakage issues are negligible and it’s comfortable as well.
Solid performing mask, doesn’t aim to be revolutionary b ut doesn’t need to be. It does all the fundamentals of a CPAP mask properly without fuss so I would recommend this mask to anyone who wants something that just works.
First things first, how well does it work? After a few weeks of usage, I can say that it works well. The nose cushion sat a little weird the first few nights and I had small leakage, but I tried adjusting the straps some more and now it sits perfect. Pretty standard full face cushion but it works. A nice touch is that ResMed masks have a sort of safety valve that lets you breathe ambient air if your PAP machine turns off. Not really something I worry about routinely but it’s certainly nice to have the peace of mind.
In terms of comfort, the mask is solid again. It’s the usual four strap headgear that holds around the back of your head. They all have adjustment points so it wasn’t an issue for me to find that Goldilocks fit after a few nights of trial. The nasal bridge/forehead part is pretty bulky, but I like the forehead pads. They’re big and soft so they help disperse the pressure and I don’t feel any pain on my forehead after a night. Cushion is good too, doesn’t feel too forceful so I have no issues with imprints and red lines.
Another nice aspect, rotating tube connector. It rotates a full circle so you can position the hose perpendicular to your body, keeping it off your chest/arms. I mostly sleep on my back but nothing about the mask makes me think it wouldn’t work the same for side sleepers.
My only complaint is, like another review mentioned, the nasal bridge part is very bulky. You’re definitely going to lose some line of sight, so I don’t read at night anymore.
This mask is easy to sleep with and lasts a very long time. The parts are tough, and easy to replace. This is the 4th mask That I had ordered.
The mask is comfortable and the seal is very good, above average. I dont have many leaks. It would be a 5 star mask but it is very bulky compared to other cpap masks, and the bar in front of my eyes is huge and unnecessary. I wish they would develop these masks so that they allow you to wear your mask and read or watch tv. I know some of them do but not all of them, and this one has a really good cushion and a really good seal. The therapy is more important, so I sacrifice certain things, and it is more important that I wake up refreshed and ready to go then it is that I can read at night, but there needs to be some changes to make it a 5 star mask to me. 3 stars for performance though.