ResMed S9 VPAP™ ST with H5i™ Humidifier and ClimateLine™ Heated Tubing
SKU: 36028

ST, T and S Modes:

IPAP 4 to 25 cm H2O; EPAP 3 to 25 cm H2O

CPAP Mode Pressure:

4 to 20 cm H2O

Ramp Time :

0 to 45 min. (5-min. increments)

Starting Ramp Pressure:

4 to APAP/CPAP Pressure

VPAP Dimensions:

6.0 x 5.5 x 3.4” (153 x 140 x 86 mm)

Weight:

1.84 lb (835 g)

Sound pressure level (CPAP mode):

24 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2002

Air outlet:

The 22 mm conical air outlet complies with ISO 5356-1

Standard Filters:

Polyester fiber

Set-up:

LCD/keypad

Supplemental Oxygen:

Recommended maximum supplemental oxygen flow: 15 L/min

Housing Construction:

Flame retardant engineering thermoplastic

Operating Temperature:

Temperature 41°F to 95°F (+5°C to +35°C)
Humidity 10-95%, non-condensing
Altitude sea level to 8,500’ (2,591 m)

Pressure Relief on Exhale:

Easy-Breathe

Storage and Transport:

Temperature -4°F to 140°F (-20°C to +60°C), Humidity 10-95% non-condensing

90W Power Supply Unit:

Input range 100-240V, 50-60Hz, 70W (80VA) (typical power consumption), >100VA (maximum power consumption)

Electromagnetic compatibility:

Product complies with all applicable EMC requirements according to IEC60601-1-2, for residential, commercial and light industry environments.

Humidification:

Integrated Heated Humidifier

Warranty:

2 years

DC Power:

Use only the supplied DC-12 Converter by ResMed for DC input or damage may occur and warranty voided.

Aircraft Use:

ResMed confirms that this device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160F, section 21, category M) for all phases of air travel.

IEC 60601-1 classification

Class II (double insulation), Type BF